Every installation begins with a site grading assessment. Fort Lauderdale residential lots vary widely in size and slope, so the available footprint and drainage paths are confirmed before any base work is scoped. A standard court requires a minimum 60 ft x 120 ft area. Utility lines and irrigation are marked before excavation, and the sub-base is compacted to a stable depth before the slab or asphalt layer is poured.
South Florida’s heat and heavy rain demand a drainage system built into the base, not added as an afterthought. A concrete slab with an integrated drainage gradient sheds water cleanly after storms and prevents the surface heave that cracks acrylic coatings prematurely. The acrylic color coating is applied in multiple layers over the cured slab for UV stability and consistent ball response.
Net posts are set in concrete footings at regulation spacing, and perimeter fencing is anchored with galvanized steel posts to resist the salt air and humidity that corrode untreated steel. Regulation line striping is the final step before the walkthrough. The itemised written estimate covers every stage, base prep, drainage, surfacing, fencing, and lines, so there are no scope surprises once work begins.
Why Choose Us
Why choose us for tennis court installation in Fort Lauderdale
Every job is scoped on-site, quoted in writing, and signed off with a walkthrough, no guesswork at any stage.
Written Estimate Before Any Work Starts
Base prep, surfacing, fencing, and line marking are quoted as separate line items so you know exactly what is covered.
On-Site Evaluation Every Time
The site visit assesses drainage and slope before any scope is written or commitment is made.
Final Walkthrough Before Sign-Off
The finished court is reviewed with you in person before the job is considered complete and closed out.
Residential to Commercial Scope
We arrange builds for backyard lots, HOA facilities, school campuses, and commercial properties across Broward County.
Resurfacing Available for Worn Courts
Existing courts with cracked or faded surfaces can be recoated and restriped without a full rebuild.
Questions about tennis court installation in Fort Lauderdale
How much does it cost to install a tennis court?
Most residential tennis court installations come in at $45,000-$80,000, depending on surface type, base preparation, fencing, and lighting. Asphalt bases with acrylic coating sit at the lower end; post-tension concrete or cushioned surfaces push costs higher. An on-site evaluation produces an itemised written estimate so you know exactly what each line item covers.
What usually changes the cost of a tennis court installation?
The four biggest cost drivers are base material, surface type, drainage work, and fencing. A site that needs significant grading or subsurface drainage adds to base preparation costs. Adding lighting, windscreens, or a cushioned acrylic surface each adds a separate line item. An itemised estimate breaks all of this out before any work begins.
What is the cheapest way to build a tennis court?
An asphalt base with a standard acrylic coating is the lowest-cost route for a full-size court. Skipping lighting and using chain-link rather than powder-coated steel fencing also reduces the total. Going cheaper on base thickness or drainage, however, leads to cracking and pooling within a few years, which costs more to fix than the original saving.
Will a tennis court fit in my yard?
A regulation singles court needs a minimum cleared area of roughly 60 by 120 feet; a doubles court needs about 60 by 120 feet of playable surface plus run-off space, totalling closer to 7,200 square feet. An on-site evaluation confirms whether your yard can accommodate the court and any required setbacks or drainage buffers.
How much space do I need for a tennis court?
A regulation doubles court measures 36 by 78 feet, but you need run-off clearance on all sides. The recommended total footprint is approximately 60 by 120 feet, or about 7,200 square feet. Tighter lots may still work if setbacks allow, which an on-site evaluation can confirm.
Do I need special measurements for a tennis court?
Yes. USTA standards set the court at 78 feet long and 36 feet wide for doubles, with specific net-post positions and service-box dimensions. Line marking must match those specs for the court to play correctly. The site evaluation and design phase confirms all measurements before base preparation begins.
How long does a tennis court last before major repairs?
A well-built asphalt court with proper drainage typically goes 8 to 12 years before needing resurfacing. Post-tension concrete can last longer between major repairs. Courts built on poorly compacted bases or with inadequate drainage fail much sooner, often cracking within 3 to 5 years. Base quality at installation is the single biggest factor in long-term durability.
Does a tennis court add value to a property?
A well-built tennis court adds measurable appeal on larger lots, particularly in neighborhoods where outdoor amenities are expected. The value uplift varies by local market and lot size. On smaller lots, buyers sometimes view a court as reducing usable yard space, so location and lot size both matter when weighing the decision.