Skip to content

Play After Dark

Court Lighting & Fencing in Fort Lauderdale

Even coverage, contained balls, and a fence that holds up to South Florida’s salt air and humidity.

  • On-Site Evaluation
  • Itemised Estimate
  • Final Walkthrough
  • Backyard to HOA
A tall light pole with multiple large floodlights arranged in a circular pattern against a clear blue sky.

Done Right the First Time

Where rushed lighting and fencing installs fall short

The failure modes that lead to a second round of work, and how a careful approach avoids them.

Uneven Light Coverage

Fixtures placed without a beam-overlap plan leave dark edges at the corners, making evening play unsafe.

Overlap-Planned Layout

Poles are positioned so LED beam patterns overlap at mid-court, eliminating dark spots across the full surface.

Rust-Prone Posts

Bare steel posts in Fort Lauderdale’s salt air corrode within a few seasons, loosening the fence line.

Galvanized & Vinyl-Coated

Vinyl-coated mesh on galvanized steel posts resists corrosion so the fence stays plumb and tight over time.

Wrong Fence Height

A fence sized for one sport often fails to contain balls for another, leading to constant interruptions.

Sport-Specific Height

Height is selected by sport, typically 10 to 12 feet for tennis, 8 feet for basketball, before any posts are set.

Shallow Post Footings

Posts set without adequate concrete depth shift under wind load, pulling the fence out of alignment.

Concrete-Set Footings

Post footings are poured to the depth required for the fence height and local wind load conditions.

Common problems, answered

Scope of Work

What court lighting and fencing covers

Both systems are planned and installed together so coverage, containment, and access all work as one.

Lighting Upgrade on Existing Court

Retrofit LED fixtures onto an already-built court.

Fencing Only

Perimeter fence without a lighting component.

Combined New-Build Package

Lighting and fencing planned together from the start.

How It Works

Lighting and fencing work together as one finishing system

Even coverage and the right fence height make a court usable at night and safe for the surrounding yard.

A proper lighting layout covers the full court with no dark edges or glare aimed at neighboring properties. LED fixtures mounted on galvanized steel poles are positioned so the beam pattern overlaps at mid-court. Conduit runs are buried during installation, and wiring is routed to a dedicated circuit. Fort Lauderdale’s year-round outdoor season makes evening play a regular need, not an occasional one.

Fencing decisions involve height, mesh size, post anchoring, and gate placement. Vinyl-coated mesh on galvanized steel posts resists the salt air and humidity that accelerate rust on untreated steel in South Florida. Post footings are set in concrete to the depth required for the fence height and wind load. HOA properties often need fencing that meets boundary and sight-line rules, which are reviewed before installation.

Ball containment netting can be added above the fence line where overhead clearance is limited. Gate placement is confirmed during the site evaluation so access points align with the surrounding yard layout. The full scope, pole count, fence run, gate positions, and conduit routing, is itemised in the written estimate before any work begins.

Why Choose Us

Why Fort Lauderdale Court Builders for lighting and fencing?

Accountability at every stage, from the first site visit to the final walkthrough.

Written Scope Before Any Work Starts

The itemised estimate covers pole count, fence run, gate positions, and conduit routing, no surprises mid-job.

On-Site Evaluation First

The site visit assesses space, drainage, and electrical access before any scope is confirmed.

Final Walkthrough Sign-Off

The job is not closed until you have walked the court and confirmed coverage, fence alignment, and gate operation.

Backyard to Commercial Scale

We arrange installs for residential backyard courts, HOA communities, schools, and commercial sports facilities.

Broward County Coverage

Service runs across Fort Lauderdale, Weston, Parkland, Davie, Southwest Ranches, and surrounding Broward areas.

Aerial view of multiple illuminated tennis courts at night with bright floodlights.
Finished regulation tennis court with acrylic surface and crisp white line striping backyard

The Process

From first call to finished court

  1. 01

    Request an Evaluation

    The site visit assesses space, existing electrical access, and fence run before anything is scoped.

  2. 02

    Review Your Written Estimate

    You receive an itemised estimate covering pole placement, fence height, gate positions, and conduit routing in full detail.

  3. 03

    Installation & Walkthrough

    Lighting and fencing are installed together, then you walk the finished court before the job is signed off.

Pricing Estimates

Typical Court Lighting & Fencing Prices

JobTypical costTypical size
Fence installation$6,000-$15,000Per court
Court lighting$8,000-$20,000Per court
Lighting and fencing package$14,000-$30,000Per court
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about court lighting and fencing

  • What kind of lighting works best for my court?

    LED fixtures mounted on dedicated poles are the standard choice for sports courts. They produce consistent, shadow-free coverage, run cooler than metal halide, and draw significantly less power. Pole height and beam angle are set to match your court dimensions, so the light lands on the playing surface rather than scattering into the yard.

  • How high should the fence be for my court?

    Tennis courts typically use 10-foot fencing on the sides and up to 12 feet at the ends to contain lobs. Pickleball and basketball courts generally work with 8-foot fencing. The right height depends on the sport, ball trajectory, and how much buffer space surrounds the court.

  • Will my project cost more if wiring, posts, or footing work is uncovered?

    Hidden conditions like undersized conduit, shallow rock, or deteriorated post footings can add cost. The on-site evaluation is designed to surface these issues before work starts, and the itemised written estimate reflects what was found. Any scope change after that is discussed before work proceeds, not invoiced as a surprise.

  • How do you keep the lights from bothering my neighbors or spilling into nearby homes?

    Fixtures are aimed using a defined beam angle and mounting height calculated for your court dimensions. Full-cutoff or sharp-cutoff LED optics direct light downward onto the playing surface. Pole placement is set so the brightest zones stay within the court boundary, keeping spill onto neighboring properties minimal.

  • How do you make sure the lights cover the whole court without dark spots?

    Pole count, height, and fixture beam angle are calculated against the court’s exact dimensions before any hardware is ordered. The goal is uniform foot-candle coverage across the full playing surface. After installation, the final walkthrough confirms even coverage and identifies any adjustments needed before the job is signed off.

  • How do you choose a fence height that keeps balls in without feeling too tall?

    Height is matched to the sport’s ball trajectory and the available buffer space around the court. Tennis end lines typically need 12 feet; side runs work at 10 feet. Pickleball courts usually stay at 8 feet. Keeping the height sport-specific avoids the closed-in feel that comes from over-fencing a smaller court.

  • Will the layout work with my court size and the space around it?

    Layout is confirmed during the on-site evaluation, which measures the court footprint, available setback, and any obstacles like trees or structures. Pole and post positions are then planned to fit within those constraints before the itemised estimate is written, so there are no surprises during installation.

  • Can you place the lights so the court is bright without shining into the houses nearby?

    Full-cutoff LED fixtures direct light downward within a defined beam angle, limiting horizontal spill. Pole placement is calculated so the brightest zones stay within the court boundary. On tighter lots, fixture aiming is adjusted during installation and confirmed at the final walkthrough to keep neighboring properties unaffected.

More questions about Court Lighting & Fencing?

Get an On-Site Evaluation & Written Estimate

Tell us the site and the sport. We’ll schedule an assessment of the space and put the full lighting and fencing scope in writing before anything is booked.

Request an Evaluation