Skip to content

Court Construction

Basketball Court Installation in Fort Lauderdale

A properly graded, UV-resistant court that holds up through South Florida’s rainy season and plays well year-round.

  • On-Site Evaluation
  • Written Estimate
  • Backyard to Commercial
  • Final Walkthrough
Finished half-court basketball court with regulation striping and installed hoop on a concrete slab in a residential yard.

What Goes Wrong

Where rushed installations fail, and what a proper build does differently

Skipped Site Grading

A court laid on uneven or soft ground will develop low spots that collect standing water after every summer storm.

Grade-First Assessment

The site is measured and graded before any base material is placed, with drainage paths confirmed at the start.

Thin or Weak Base

A base poured under 4 inches without proper compaction shifts over time, cracking the surface above it.

Compacted 4-Inch Slab

Concrete is poured at a minimum 4-inch depth with sub-base compaction checked before the surface layer is applied.

No UV Protection

Bare or single-coat surfaces fade and degrade quickly under Fort Lauderdale’s year-round direct sun exposure.

Multi-Layer Acrylic Coat

Two or more layers of UV-resistant acrylic coating are applied to protect the surface and maintain consistent ball bounce.

Wrong Surface for Grass

Grass and bare soil compress and shift under play, making a stable, level court impossible without a solid base underneath.

Solid Base Required

Concrete, asphalt, or an existing slab provides the firm, level foundation that any finished court surface depends on.

Common problems, answered

Scope of Work

What the installation covers

From site prep through hoop setup, every stage of the build is handled as part of the project.

Half Court Layout

47 ft x 50 ft, fits most residential backyards.

Full Court Layout

94 ft x 50 ft for larger lots or commercial sites.

Modular Tile Surface

Interlocking tiles over an existing slab.

Resurfacing & Repair

Worn or cracked courts restored to playing condition.

Built to Last

What a basketball court installation actually involves

A lasting court starts with the base layer and drainage, not the surface you can see.

The process starts with a site assessment: measuring the available space, checking the existing grade, and confirming drainage paths. A half-court at 47 ft x 50 ft fits most residential lots; a full court needs roughly 94 ft x 50 ft. Utility lines and irrigation are located before any excavation begins.

Base layer choice drives long-term durability. A concrete slab at 4 inches minimum with proper compaction is the most stable option. Asphalt is a common alternative for larger areas. Modular interlocking tiles work over an existing slab and allow water to pass through, which suits South Florida’s heavy rainfall season.

Once the base is set, an acrylic color coating is applied in two or more layers for UV resistance and consistent ball bounce. Regulation line marking follows, then hoop installation with post footings anchored to the slab. A final walkthrough confirms the surface slope, line placement, and hoop height before sign-off.

Why Choose Us

Why choose us for basketball court installation in Fort Lauderdale?

Every project is backed by a clear process, written scope, and a final check before the job is closed.

Written Scope Before You Commit

An itemised estimate covers base prep, surfacing, and line marking as separate line items, no surprises after work starts.

Drainage Checked at the Start

South Florida’s rainy season makes drainage the first thing assessed, not an afterthought once the slab is poured.

On-Site Evaluation Every Time

The site visit checks grade, access, and utility locations before any scope or price is confirmed.

Backyard to Commercial Coverage

Residential lots, HOA facilities, schools, and commercial properties are all within the service area and scope.

Final Walkthrough Before Sign-Off

Surface slope, line placement, and hoop height are all confirmed on-site before the project is considered complete.

Resurfacing Available Too

Worn or cracked courts can be assessed and resurfaced without a full rebuild, keeping costs proportionate to the problem.

Aerial view of multiple illuminated tennis courts at night with bright floodlights.
Finished regulation tennis court with acrylic surface and crisp white line striping backyard

The Process

From first enquiry to finished court

  1. 01

    Request an Evaluation

    Tell us the site location and intended use, and we schedule a visit to assess the ground conditions.

  2. 02

    Review Your Written Estimate

    You receive an itemised estimate covering base preparation, surface type, line marking, and hoop installation before any work starts.

  3. 03

    Build, Coat & Sign Off

    The court is graded, based, coated, and marked, then a final walkthrough confirms slope, lines, and hoop height.

Pricing Estimates

Typical Basketball Court Installation Prices

JobTypical costTypical size
Half basketball court$30,000-$55,0001/2 court
Full basketball court$45,000-$80,000Full court
Premium full basketball court$80,000-$120,000Full court
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about basketball court installation in Fort Lauderdale

  • How much does it cost to get a basketball court installed?

    Most basketball court installations come in at $30,000-$55,000, depending on court size, surface material, base conditions, and whether fencing or lighting is included. A half court on a prepared slab costs less than a full court built from raw ground up. An on-site evaluation produces an itemised written estimate so you know the full number before any work starts.

  • What is included in the price for a basketball court installation?

    The itemised written estimate covers base preparation, surfacing, line marking, and any fencing or lighting scoped into the project. Hoop installation is typically included when it is part of the agreed scope. You receive a final walkthrough before the job is signed off, so every line item is accounted for upfront.

  • Will I be charged extra for grading, drainage, or base prep?

    Grading, drainage, and base preparation are itemised separately in the written estimate rather than buried in a flat rate. The on-site evaluation assesses existing ground conditions first, so any earthwork costs are identified before you commit. There are no surprise add-ons after the estimate is agreed.

  • How much space do I need for a backyard basketball court?

    A regulation half court is 47 by 50 feet, so you need at least that footprint plus a few feet of buffer on each side for safe play. A full court runs 94 by 50 feet. Smaller recreational courts can be built in tighter spaces, and the on-site evaluation confirms exactly what fits your yard.

  • Can a basketball court be built on grass?

    No. Grass cannot support a stable court surface. The turf and topsoil must be removed, the ground graded and compacted, and a proper base of asphalt or concrete installed before any playing surface goes down. Skipping this step leads to an uneven, short-lived court that shifts with rain and foot traffic.

  • Can you install a basketball court on dirt or an existing slab?

    An existing slab can work if it is structurally sound, level, and drains adequately, the on-site evaluation checks all three. Raw dirt requires excavation, compaction, and a full base build before surfacing. Pouring a court directly on unprepared dirt causes cracking and settling within a few seasons.

  • Is my yard big enough for a basketball court?

    The minimum practical footprint for a recreational backyard court is around 30 by 30 feet, though a proper half court needs 47 by 50 feet. The on-site evaluation measures the usable space, accounts for setbacks and drainage, and tells you exactly what size court the yard can support.

  • Will the court need grading or drainage work before installation?

    Almost every court needs at least minor grading to create a consistent 1 to 2 percent slope that sheds water. Low-lying or flat yards in South Florida often need French drains or catch basins added beneath the base. Every enquiry starts with an on-site drainage evaluation, and the written estimate itemises any drainage work required.

More questions about Basketball Court Installation?

Get an On-Site Evaluation & Written Estimate

Tell us the site and the sport. We’ll schedule a ground assessment and put the full scope in writing before anything is booked.

Request an Evaluation